Description
- Pololu Motoron M2H24v16 Dual High-Power Motor Controller Kit for Raspberry Pi
- Supports independent control of two bidirectional DC motors
- Control interface: I2C
- Operating voltage: 6.5 - 40 V
- Continuous output current per channel: 16 A
The Pololu Motoron M2H24v16 Dual High-Power Motor Controller Kit for Raspberry Pi is a sophisticated product designed to facilitate the control of DC motors from a Raspberry Pi (Model B+ or newer) via an I2C interface. The M2H24v16 is capable of supporting motor supply voltages ranging from 6.5 V to 40 V and delivering continuous output currents of up to 16 A per motor. This kit comes with aluminum standoffs, header pins, and terminal block options, which are included but not pre-soldered.
The Motoron M2H series of dual high-power motor controller add-on boards are designed to control up to two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). These controllers are engineered to stack on top of a Raspberry Pi (Model B+ or newer), similar to a HAT (Hardware Attached on Top). Moreover, multiple controllers can be stacked on top of each other, enabling independent control of a multitude of motors.
- 1x 2x20 Stackable Female Header
- 3x 2-pin 5mm Screw Terminal Block
- 1x 1x25 Breakaway male header (can be cut or broken into smaller header strips as desired)
- A set of four M2.5 Standoffs (11 mm length), screws, and nuts for securing the board at the proper height.
- Channels: 2
- Model: Motoron M2H24v16
- Control interface: I2C
- Minimum operating voltage: 6.5 V
- Maximum operating voltage: 40 V
- Continuous output current per channel: 16 A
- Minimum logic voltage: 3.0 V
- Maximum logic voltage: 5.5 V
- Reverse voltage protection: Yes
- Connectors soldered: No
- Weight: 17 g