- Elderly dog ​​joint care mattressPololu DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit

Title Default Title
Qty:

Description

  • DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit by Pololu
  • Highly configurable through SPI interface
  • Built-in under-voltage, over-current, and over-temperature protection
  • Can deliver up to 1.2 A continuous per phase
  • Supply Voltage Range: 4.5 V - 48 V
  • Header pins soldered: No

The Pololu DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit operates from 4.5 V to 48 V and can deliver up to approximately 1.2 A continuous per phase without a heat sink or forced air flow (2 A peak). The SPI interface allows configuration of the current limit, step mode (11-step modes from full-step through 1/256-step), decay mode, and stall detection.

The driver also features built-in protection against under-voltage, over-current, and over-temperature conditions. This version of has the maximum current limit set to a fixed 2A, and SPI can be used to set the actual current limit to any of 16 evenly spaced values from 125 mA up to 2 A (i.e. in increments of 125 mA).

  • 1x Pololu DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit

Size

  • 0.6 x 0.8 inch (L x W)

PDF File

  • Minimum Operating Voltage: 4.5 V
  • Maximum Operating Voltage: 48 V
  • Continuous Current Per Phase: 1.2 A
  • Maximum Current Per Phase: 2 A
  • Minimum Logic Voltage: 1.8 V
  • Maximum Logic Voltage: 5.5 V
  • Current Limit Control: Fixed 2A max with SPI scaling
  • Reverse Voltage Protection: No
  • Header pins soldered: No
  • Weight: 1.3 g